1. initServerConfig 初始化服务配置

总结：你能想到的一些基础配置都在这里实现

#define C_OK                    0
#define C_ERR                   -1

/* Static server configuration */
#define CONFIG_DEFAULT_DYNAMIC_HZ 1             /* Adapt hz to # of clients.*/
#define CONFIG_DEFAULT_HZ        10             /* Time interrupt calls/sec. */
#define CONFIG_MIN_HZ            1
#define CONFIG_MAX_HZ            500
#define MAX_CLIENTS_PER_CLOCK_TICK 200          /* HZ is adapted based on that. */
#define CONFIG_DEFAULT_SERVER_PORT        6379  /* TCP port. */
#define CONFIG_DEFAULT_TCP_BACKLOG       511    /* TCP listen backlog. */
#define CONFIG_DEFAULT_CLIENT_TIMEOUT       0   /* Default client timeout: infinite */
#define CONFIG_DEFAULT_DBNUM     16
#define CONFIG_MAX_LINE    1024
#define CRON_DBS_PER_CALL 16
#define NET_MAX_WRITES_PER_EVENT (1024*64)
#define PROTO_SHARED_SELECT_CMDS 10
#define OBJ_SHARED_INTEGERS 10000
#define OBJ_SHARED_BULKHDR_LEN 32
#define LOG_MAX_LEN    1024 /* Default maximum length of syslog messages.*/
#define AOF_REWRITE_PERC  100
#define AOF_REWRITE_MIN_SIZE (64*1024*1024)
#define AOF_REWRITE_ITEMS_PER_CMD 64
#define AOF_READ_DIFF_INTERVAL_BYTES (1024*10)
#define CONFIG_DEFAULT_SLOWLOG_LOG_SLOWER_THAN 10000
#define CONFIG_DEFAULT_SLOWLOG_MAX_LEN 128
#define CONFIG_DEFAULT_MAX_CLIENTS 10000
#define CONFIG_AUTHPASS_MAX_LEN 512
#define CONFIG_DEFAULT_SLAVE_PRIORITY 100
#define CONFIG_DEFAULT_REPL_TIMEOUT 60
#define CONFIG_DEFAULT_REPL_PING_SLAVE_PERIOD 10
#define CONFIG_RUN_ID_SIZE 40
#define RDB_EOF_MARK_SIZE 40
#define CONFIG_DEFAULT_REPL_BACKLOG_SIZE (1024*1024)    /* 1mb */
#define CONFIG_DEFAULT_REPL_BACKLOG_TIME_LIMIT (60*60)  /* 1 hour */
#define CONFIG_REPL_BACKLOG_MIN_SIZE (1024*16)          /* 16k */
#define CONFIG_BGSAVE_RETRY_DELAY 5 /* Wait a few secs before trying again. */
#define CONFIG_DEFAULT_PID_FILE "/var/run/redis.pid"
#define CONFIG_DEFAULT_SYSLOG_IDENT "redis"
#define CONFIG_DEFAULT_CLUSTER_CONFIG_FILE "nodes.conf"
#define CONFIG_DEFAULT_CLUSTER_ANNOUNCE_IP NULL         /* Auto detect. */
#define CONFIG_DEFAULT_CLUSTER_ANNOUNCE_PORT 0          /* Use server.port */
#define CONFIG_DEFAULT_CLUSTER_ANNOUNCE_BUS_PORT 0      /* Use +10000 offset. */
#define CONFIG_DEFAULT_DAEMONIZE 0
#define CONFIG_DEFAULT_UNIX_SOCKET_PERM 0
#define CONFIG_DEFAULT_TCP_KEEPALIVE 300
#define CONFIG_DEFAULT_PROTECTED_MODE 1
#define CONFIG_DEFAULT_LOGFILE ""
#define CONFIG_DEFAULT_SYSLOG_ENABLED 0
#define CONFIG_DEFAULT_STOP_WRITES_ON_BGSAVE_ERROR 1
#define CONFIG_DEFAULT_RDB_COMPRESSION 1
#define CONFIG_DEFAULT_RDB_CHECKSUM 1
#define CONFIG_DEFAULT_RDB_FILENAME "dump.rdb"
#define CONFIG_DEFAULT_REPL_DISKLESS_SYNC 0
#define CONFIG_DEFAULT_REPL_DISKLESS_SYNC_DELAY 5
#define CONFIG_DEFAULT_SLAVE_SERVE_STALE_DATA 1
#define CONFIG_DEFAULT_SLAVE_READ_ONLY 1
#define CONFIG_DEFAULT_SLAVE_IGNORE_MAXMEMORY 1
#define CONFIG_DEFAULT_SLAVE_ANNOUNCE_IP NULL
#define CONFIG_DEFAULT_SLAVE_ANNOUNCE_PORT 0
#define CONFIG_DEFAULT_REPL_DISABLE_TCP_NODELAY 0
#define CONFIG_DEFAULT_MAXMEMORY 0
#define CONFIG_DEFAULT_MAXMEMORY_SAMPLES 5
#define CONFIG_DEFAULT_LFU_LOG_FACTOR 10
#define CONFIG_DEFAULT_LFU_DECAY_TIME 1
#define CONFIG_DEFAULT_AOF_FILENAME "appendonly.aof"
#define CONFIG_DEFAULT_AOF_NO_FSYNC_ON_REWRITE 0
#define CONFIG_DEFAULT_AOF_LOAD_TRUNCATED 1
#define CONFIG_DEFAULT_AOF_USE_RDB_PREAMBLE 1
#